*CALL to ORDER and check availability*

Like some of our other products you wouldn't expect to see from a company that builds weapon's vaults and rescue tool brackets, the Plastix Plus cutting boards were originally designed for our personal use. After some of our customers saw them sitting in the shop and asked if they were for sale, we decided to say "YES!"

We offer 2 different sizes. Both are 1/2" thick HDPE plastic. The boards are NSF 100% food grade, (although black boards may not be acceptable for some restaurants or cookoffs, due to regulations). Both boards have a cutout handle, rounded edges, and a juice trough all the way around the board! They also have an extra capacity juice reservoir in the corner.

KITCHEN BOARD - $30

The "Kitchen" board is 11.5" by 15.5". It has a cutting area of 9.5" x 11.25". This size will easily fit into the dishwasher. This size is great for cutting up small chickens, fruits and vegetables, herbs, and many other everyday items.

COMMERCIAL BOARD - $55

The "Commercial" board is 15" by 23.5". It has a cutting area of 13" by 16.5". This board is large and may not fit in your home dishwasher. The commercial board is great for racks of ribs, briskets, watermelons, and other large items.

If you are into off-roading and Jeeping, you probably know how valuable a high lift jack is. Of course, if your jack sinks down into the ground, it kind of defeats the purpose of having one. A simple yet effective piece of equipment is a jack plate. It allows you to disperse the downward force of the jack over a larger area of ground.

The Plastix Plus Jack Plate, or PPJP, is a simple, yet highly effective piece of equipment to add to your arsenal of off-roading tools. There are a few options out there, so what makes ours the best choice? For one, the HDPE material used to make the PPJP is virtually indestructible. It resists UV rays, freshwater, saltwater, mud, gas, diesel, oil, hydraulic/transmission fluids, etc. Unlike wood and metal, HDPE will not rot, fade, warp, rust, peel or split.

The plate is made from 3/4" thick material and is extremely impact resistant. However, at 3/4" thick, it stores much easier than some of the other plates available, which can be up to 3" thick! There are also no small grooves or "gunk cubby's" to allow dirt and mud to get crammed into. We have integrated a hole in one corner to allow a 1/2" thick rope of your choice to go through. Add a couple of feet, and be able to pull your plate out of the mud without having to get your hands too dirty. The recessed jack receiver section in the middle is 1/4" deep to help prevent your jack foot from sliding out. It has also been sized to fit every jack we had available with our local Jeep group of over 1,000 members!

Specifications:

• Weight: 3 pounds
• Overall Size: 11.5" x 11.5" x 3/4"
• Jack receiver size: 7.5" x 5.75" x 1/4"

Do you worry about keeping belongings safe and secure in your Jeep? The Plastix Plus Trunk, or PPT, is the ideal solution. Designed for the Jeep Wrangler JK, the PPT allows you to leave your belongings secured and out of sight to criminals. The quick and simple installation means you can choose when to leave it in, or when to take it out.

What makes our product different from the other options out there? Built by Jeepers, specifically for Jeepers, the PPT uses a thermo welding process with a plastic material called HDPE. When the welds cool, the plastic is bonded as one piece. We like to consider the PPT 100% "Jeeper Proof". It resists UV rays, freshwater, saltwater, mud, gas, diesel, oil, hydraulic/transmission fluids, etc. Unlike wood and metal, HDPE will not rot, fade, warp, rust, peel or split. At 1/2" thick, the material is extremely impact resistant and will literally take anything you can throw at it; chain, rocks, sledgehammers, mountain goats (or armadillos for us Texans)....you name it.

*Disclaimer: Plastix Plus does not encourage throwing mountain goats or armadillos at the PPT.

Do you like to buy American? Not only is the PPT built in America, but every part of the PPT including the plastic itself, the rubber trim, the latches, the hitch pins, even the stainless steel screws that attach the latches are proudly MADE IN THE USA. You can feel confident knowing you are buying 100% American!

Benefits and features include:

• No drilling or cutting of your Jeep for installation. In fact, no tools are needed at all!
• Installs in under 1 minute, and removes just as easy.
• Weather stripping seals against the tailgate, helping to keep out dust, dirt, mud and water.
• Utilizes the tailgate as a door, so there are no extra keys to carry around or locks to fumble with.
• Once your tailgate is locked, you cannot remove or access the inside of the PPT.
• Will work with your hard top, soft top, or topless.
• Bungee rail allows for extra storage on top. The rails also have larger hand holes to aid with installing/removing.

*2 door model requires removal of the back seat (utilizes existing seat brackets and metal angle attached to PPT)

Includes:

• PPT (the box itself) with bungee rails welded on and latches already attached.
• Hitch pins to prevent the latches from getting knocked/pulled open by gear, especially while off-roading.
• Weather stripping to seal against tailgate.

Specifications:

• Weight: 43 pounds
• Internal size: 11" tall x 32" wide x 32" deep
• External size: 15" tall x 33" wide x 33" deep

*The back wall of the 2 door model is 33-7/8" wide

For 2009-2014 without subwoofer or
2015+ with FLOOR MOUNT subwoofer:

• 4 door JK (Item# PPTJK4)
• 2 door JK (Item# PPTJK2)

For 2009-2014 with SIDE MOUNT subwoofer:

• 4 door JK (Item# PPTJK4s)
• 2 door JK (Item# PPTJK2s)

MSRP: $499

Installation video HERE

**Special note about power door locks**

You may be thinking, "If I have my windows down or top off, what is keeping someone from walking by, hitting my power unlock button, and opening my tailgate?" You will be happy to know that Jeep has already addressed this for you. Once you lock your doors with the remote, the security system is on a 16 second time delay. The red security light on your dash will blink quickly for the first 16 seconds. After this, it will blink once every 5 seconds. At this point, your security system is active, and the unlock buttons on the doors will not work, until you disable the alarm system with your remote.

While our main business deals with catering to government agencies and emergency services, a couple of us here are also Jeepers! Naturally, we like to make stuff for ouselves. Most of the items were things we wanted, but just couldn't find anywhere else. We were determined not to let that stop us, so we began putting our thoughts and design ideas down on paper....and then into plastic!

We started with some switch mounting plates, some custom sized boxes to carry all of our gear in, and even custom engraved wheel center caps. We then moved on to some more universal items such as high lift jack plates to prevent our jacks from sinking into soft ground. Then we had one of our law enforcement customers ask about a secure storage box for his Jeep. After many different design and installation ideas, we came up with something simple, yet strong and effective. Over a period of a few months, we had more customers and Jeep club members ask if we were selling any of the stuff we made. As much as we liked having the cool custom stuff all to ourselves, we decided to come up with a few items we could offer to the Jeep community.

Each and every time we go out and hit the trails, we come up with more ideas of things to make. Although business is steady, we occasionally find time to make these ideas a reality, so check back every so often and see what we have available. If you have something you are looking for, or an idea you want to run by us, please feel free to drop us a line.

Remember, enjoy the trails, tread lightly and save the wave!

WEATHER PROOF CUSTOM SIGNS

Plastix Plus can design and fabricate signs for any application. Our signs are made from ½” thick HDPE plastic that is UV stable and won’t fade or warp. Our unique “color core” material gives you a choice of colors to match your specific needs.

With our CNC capabilities, your sign is computer cut to expose the core color while maintaining the outer skin color. The result is a sign that is permanent!! The letters won’t fall off or fade like other signs. When possible, we can use your company logo and we also have a large choice of fonts available. These signs are great for outdoor or indoor application where weather, moisture or humidity is an issue that would destroy or degrade a wood or metal sign.

APPLICATIONS:

• Building Signs
• Street Signs
• Warehouse
• Municipalities
• Stables
• Apartment Buildings
• Refineries
• Parks and Wildlife

STOCK COLORS:

• Black/white/black
• Red/white/red
• Blue/white/blue
• Brown/white/brown
• Tan/green/tan
• Other colors available by special order

Pricing varies so please call us with your specific needs.

If you use Res-Q-Jack vehicle stabilization accessories, we can help you store them!!

Plastix Plus offers a full line of heavy duty cargo boxes for all Res-Q-Jack equipment. These boxes are designed to fit specific pieces of the Res-Q-Jack products to optimize storage space and simplify deploying your system. The boxes are 100% HDPE plastic and are very rugged. We are so confident in their strength that we offer a lifetime warranty !!! The boxes are designed to be stack able or you can leave them side by side. They have built in carry handles on all sides for ease of carrying and storing. We have models (RQJ-3) available for the “Space Saver” Jacks as well as smaller boxes designed to hold all your chains, hooks and heads. A standard 4 point system requires 2 long boxes (RQJ-1) and 2 short boxes (RQJ-2). See below for dimensions and prices. If needed, we can custom build boxes to a specific size in case our standard sizes won’t work for your application.

Whether it is for your struts, plates, or ends, we have the perfect storage solution for your Paratech products! We offer a few standard boxes for the plates. Other boxes for struts and other parts are built to your specs. Just let us know what size you need, and we can build them for you.

Here are a few examples:

Tuff Tote Cargo Boxes

The perfect solution for your apparatus equipment storage and organization problems is our Tuff Tote Cargo Boxes. Any size, and quantity. You tell us your dimensions, we build them.
Why have all your equipment rolling around in your apparatus trays?? With Tuff Totes, you can keep equipment neatly organized for rapid deployment during emergency scenes. Plus it makes clean up after a call very fast and easy.
We offer 2 styles of boxes. For lighter weight equipment, our standard construction boxes should do the trick.

While our standard construction boxes will hold most equipment you can throw at them, our HD (Heavy Duty) boxes have HEAVY DUTY reinforced ends to handle extreme weights such as rescue struts and jacks or chains. The ends of the box are recessed in which allows for larger welds on the inside and outside of the box.
The plastic we use is resistant to all chemicals, even hydraulic fluid!

Pete and Crew,

The pics you sent of our new engine look awesome, and as always, I am sure it looks even better in person! You guys always do such great work, it helps increase the pride in the vehicles to have such well laid out compartments and your work is an integral part of that.

Thank you as always,

Bill Adams, Battalion Chief

Rosenberg FD

Hi Mike,

I just wanted to send you a quick message to thank you so much for your help and attention. My small issue with the mismatch wall mounts wasn't that big of a deal but the way you handled it was a throwback to the old days where customer service was King. The quick resolution and the way you over compensated me was next to no other company I've ever dealt with. Your products are great and I hope you develop more parts for the shooting community. That coupled with your unparalleled customer service means you have a customer for life. Keep up the great work!
Brian Boeglin
Fullerton, CA

Pete,

Everything fits and looks great. Y'all did an outstanding job!!!

Thanks,

August Naumann

Assistant Chief-Logistics

Magnolia Volunteer Fire Department

Pete, first let me express the great appreciation for the design and installation of the equipment mounting abilities of Plastix Plus, you and your crew completed the project on our new apparatus that far exceeded any of the expectations at Northeast Fire and rescue. The entire experience was very professionally handles from start to finish, the project that seemed quite complex to our personnel was handles with ease and the final product was superb. The equipment placement ideas that we came to Plastix Plus with were wither implemented or expanded upon to produce the safest, most practical and organized use of the compartment space the truck has to offer. Once again from all the members of the Northeast Fire and Rescue please accept this short letter as a sincere thanks and job well done with the intentions of sending more work your way.

Jim Rodgers
Fire Chief,
Northeast Fire & Rescue, Humble Texas

“YOU GUYS DO GREAT WORK”
John Cieslik
Rochester Fire Dept. in Rochester, MI.

The Cypress Creek Fire Department was probably Plastix Plus first customer. We have been using their products ever since Mike and Pete started the company. In my 18 years of experience with the fire service we have not found any other company that supplies custom equipment mounts, vehicle consoles, and apparatus equipment tray liners with the emergency services experience and level of attention to detail that Plastix Plus exhibits. Mike has 22 years of service as a fire fighter and Pete has 15 years of service as a firefighter. They know our business from the inside out, and understand the rigors of the environment and circumstances that their products will be used in. Plastix Plus is our go to vendor for all of our apparatus storage issues. When we have a problem that needs addressing or equipment that needs mounting we take the apparatus and equipment over to Plastix Plus shop, explain the problem, and leave it to their judgment how to best work it out. They have never failed to meet and exceed our expectations. The ability to take a problem to Plastix Plus and knowing that it will be expertly taken care of with only limited interaction on our part has been a tremendous asset to our organization, freeing up personnel time to work on other important projects. As a Mechanical Engineer I am very picky about how our apparatus are outfitted and maintained. Plastix Plus equipment has always been of the highest quality and extremely durable. We have been a customer of theirs for many years and will continue to use their products exclusively for all our apparatus storage and equipment management needs.

Thank You,

Richard Lieder, EFO CFO
Assistant Chief
Cypress Creek Fire Department

Eighteen months ago we received two new Heavy Rescue Trucks. The immediate question was what to do with fifty plus Paratech Struts, forty Paratech Extensions, a mess of Paratech Bases, and additional Paratech Accessories. We had some of our own ideas and had seen some examples of manufactured storage devices/containers. The Chief had seen an option while in Texas, which he described as, “some kind of black plastic.” So the search began. One of the guys in our department is a “Googleologist”, just ask him, and if he can’t find it, it does not exist. A day later, he emailed me a link to Plastix Plus.
We picked up the phone and met Mike Snow. After explaining exactly what we were looking for, Mike said that Plastix Plus was going to be able to deliver what we needed. The initial sketch was faxed to Plastix Plus. After several additional conversations and multiple revisions, the final drawing was sent to Mike. The daunting task began.

Once the big project was under way, we turned to the custom bins needed to hold all of the remaining Paratech items. Working with Mike, we devised a system where we could do our own drawing and submit them via fax. That worked extremely well and enabled us to check all of the tolerances before anything was produced. Ten custom bins later, we were off to the races.

As our large project continued, Mike went out of his way to send us photographs showing us the progress. When it neared completion, Mike spent the extra time needed to come up with the best and most cost efficient method to ship the order.

The day was finally here, the only question was, where to get a forklift? Eight (8) sheets of material, two hundred (200) welding rods, one hundred (100) stainless screws, thirty (30) man hours, four hundred fifty (450) pounds, and a custom shipping crate, and we would have one truly custom Plasix Plus storage rack. The semi-truck arrived, the frontend loader was on hand and eight firefighters stood by. The rack was unloaded and the custom crate removed. As if we had planned it this way, the rack slid right into place.

Through that entire initial process and since then, we continued to design and order additional bins from Mike at Plastix Plus. Twelve months, eighty plus custom bins, trays, and anything else we asked Plastix Plus to make for us, our two Heavy Rescue Trucks have become well organized and easy to maintain assets in our department’s fleet. Three custom trays have even found their way under the bench seats in our New Medic units.
Mike Snow, along with the entire staff at Plastix Plus, has gone above and beyond with the products and services they have provided to us. We will continue to use Plastix Plus for new bins and custom products as our Rescues continue to evolve and we find additional uses for their product throughout our entire fleet. We would highly recommend Plastix Plus to anyone looking for alternative storage methods for their Fire Apparatus, Officers’ Cars/Trucks, and even around the fire station.

Ross Green

Engineer/Paramedic

Independence Township Fire Department

Clarkston, Michigan

I was skeptical of the plastic consoles and cargo boxes when we first looked into this as an option for our Tahoe’s and Crown Victoria’s. We were interested in the consoles because no other company offered anything for our application. I was concerned about the "custom" fit for the vehicles. My concerns were completely off base where Mike Snow was involved. Mike has a very professional and "hands on" approach to customer satisfaction. I was able to give him a specific wish list that was extremely specific. Nothing that I wanted was out of the question and any alteration was handled with ease. I also liked that there were numerous options as far as load capacity and optional storage on the consoles and cargo boxes.

As far as fit and finish; it was beyond perfect. I am a very picky customer and I was unable to find anything that I did not like. Even if I did, Mike would have handled it without question. The durability of the products has been impressive and we are hard on the equipment. We have not had any concerns or failures and we are prepared to order more products for our cars this year.

Mike is a very "pro-law enforcement" supplier and it is great to deal with someone who knows what you are talking about and understands why you need something done. He is great to deal with and most important to me than anything, he is a trustworthy, honest, Christian businessman. Thanks for everything Mike.

Sgt. Jon Buckholtz
Conroe Police Department
Conroe, Texas
Professional Services Division

The 2015-2020 Ford F-150 console is constructed as a one piece unit, requiring no assembly. It is made from ½” thick HDPE plastic combined with a thermoplastic welding process, resulting in unparallel strength and durability.

This console features dual cup holders with a small storage area in the middle. A huge locking storage area is large enough for (8) 1” ring binders and doubles as a perfect height arm rest. Our console allows for full size radios and sirens that require depths of 8.5”. The padded arm rest is also INCLUDED!

LIST PRICE $860

Includes ALL mounting hardware. Comes with blank faceplate. Equipment holes can be cut to your specific equipment at no charge.

Accessories available:

• Jotto radio/siren faceplates
• Individual 12V 15A marine grade switches
• Single 12v plug
• Dual USB 3.0/USB-c charger plug with voltmeter
• Dual USB 3.0 charger plug with voltmeter
• Multimedia plug extension  *recommended for vehicles equipped with Ford SYNC
• Computer post - external mount